Per my previous post: I've gotten SBBS running rlogin in gameserver mode, and can access it from my ENiGMA system just fine.

If I don't try to pass an xtrn= value, it goes straight to the xtrn menu and I can run anything I'd like from there, and when I quit it sends me back to my bbs. Cool.

But if I pass an xtrn= value where the terminal type would normally go, it always gives me an error message like !ERROR Unable to launch external: 'ANSIVIEW'

I've tried multiple external programs, and double checked the internal codes (In this example, I'm trying to use the auto-installed ANSIview and am passing xtrn=ANSIVIEW.)

Any ideas what may begoing on? Do I possibly have the syntax off?

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: SBBS Gameserver issues running xtrn programs
By: Deepthaw to All on Sun Nov 29 2020 08:24 pm

But if I pass an xtrn= value where the terminal type would normally go, it always gives me an error message like !ERROR Unable to launch external: 'ANSIVIEW'

Did you try lowercase?
--
digital man

This Is Spinal Tap quote #28:
We've got Armadillos in our trousers. It's really quite frightening.
Norco, CA WX: 64.5°F, 19.0% humidity, 2 mph SW wind, 0.00 inches rain/24hrs

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: SBBS Gameserver issues running xtrn programs
By: Digital Man to Deepthaw on Sun Nov 29 2020 08:29 pm

Re: SBBS Gameserver issues running xtrn programs
By: Deepthaw to All on Sun Nov 29 2020 08:24 pm

But if I pass an xtrn= value where the terminal type would normally
go, it always gives me an error message like !ERROR Unable to launch
external: 'ANSIVIEW'

Did you try lowercase?

I did. Same issue. If I don't pass any kind of xtrn= parameter, it takes me straight to the xtrn menu where everything works fine.

I've verified that rlogin_auto_xtrn is set to true as well.

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: SBBS Gameserver issues running xtrn programs
By: Deepthaw to Digital Man on Sun Nov 29 2020 08:50 pm

Did you try lowercase?

I did. Same issue. If I don't pass any kind of xtrn= parameter, it takes me straight to the xtrn menu where everything works fine.

To assist with troubleshooting, I enabled the web server and get the same error message when trying to run externals via the built-in menu there, so it's definitely something systemwide...

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

Re: SBBS Gameserver issues running xtrn programs
By: Deepthaw to Digital Man on Sun Nov 29 2020 08:50 pm

Re: SBBS Gameserver issues running xtrn programs
By: Digital Man to Deepthaw on Sun Nov 29 2020 08:29 pm

Re: SBBS Gameserver issues running xtrn programs
By: Deepthaw to All on Sun Nov 29 2020 08:24 pm

But if I pass an xtrn= value where the terminal type would normally
go, it always gives me an error message like !ERROR Unable to launch
external: 'ANSIVIEW'

Did you try lowercase?

I did. Same issue. If I don't pass any kind of xtrn= parameter, it takes me straight to the xtrn menu where everything works fine.

I've verified that rlogin_auto_xtrn is set to true as well.

The next thing to check would be the access requirements of that program (and the section containing it) in SCFG->External Programs.
--
digital man

This Is Spinal Tap quote #46:
"Not an Exit" - we don't want an exit. Well that's true.
Norco, CA WX: 63.2°F, 20.0% humidity, 0 mph WSW wind, 0.00 inches rain/24hrs

---
■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net

On 11/29/2020 11:05 pm Digital Man said...

The next thing to check would be the access requirements of that program (and the section containing it) in SCFG->External Programs. --
digital man

I ended up doing a partial reinstall/restore, and that fixed it. I must have messed something up *real* good for that to break when it normally works out of the box.

--- ENiGMA 1/2 v0.0.12-beta (linux; x64; 12.19.1)
* Origin: cortex (55:1/101)