• Church Sound Board Picking up Radio

    From Hatton@VERT/THRCORN to All on Sunday, February 28, 2021 18:39:01
    Back around Thanksgiving I helped our church identify and install a new video streaming setup... and became the de-facto operator of the system. Part of this also apparently included taking over the sound system as well.

    It's actually quite a nice setup, the main board is a Mackie DL1608 that we can control either by computer and there are a number of wireless and wired microphones. It's with the latter that I've found a problem.

    While remoted into the system I discovered that 4 of the longest wire-runs are somehow picking up a local radio station. I am able to mute them as they aren't currently used but need to figure out a way to get them back in service. The runs are roughly 90 - 100 feet each and I don't know what kind of wiring was used for them.

    Does anyone have any suggestions or ideas on filtering out the signal?

    Thanks!
    Hatton

    ---
    ­ Synchronet ­ Three Corners and Beyond! http://3corners.us
  • From Digital Man@VERT to Hatton on Sunday, February 28, 2021 13:31:14
    Re: Church Sound Board Picking up Radio
    By: Hatton to All on Sun Feb 28 2021 06:39 pm

    Back around Thanksgiving I helped our church identify and install a new video streaming setup... and became the de-facto operator of the system. Part of this also apparently included taking over the sound system as well.

    It's actually quite a nice setup, the main board is a Mackie DL1608 that we can control either by computer and there are a number of wireless and wired microphones. It's with the latter that I've found a problem.

    While remoted into the system I discovered that 4 of the longest wire-runs are somehow picking up a local radio station. I am able to mute them as they aren't currently used but need to figure out a way to get them back in service. The runs are roughly 90 - 100 feet each and I don't know what kind of wiring was used for them.

    Does anyone have any suggestions or ideas on filtering out the signal?

    You're using balanced XLR mic cables? https://www.prosoundweb.com/in-the-studio-preventing-hum-and-rfi/
    --
    digital man

    Sling Blade quote #9:
    Doyle Hargraves: Morris here is a modern-day poet, kinda like in olden times. Norco, CA WX: 65.3°F, 12.0% humidity, 2 mph S wind, 0.00 inches rain/24hrs

    ---
    ■ Synchronet ■ Vertrauen ■ Home of Synchronet ■ [vert/cvs/bbs].synchro.net
  • From Jimmy Anderson@VERT/MSBGTN01 to Hatton on Sunday, February 28, 2021 14:54:00
    Hatton wrote to All <=-

    Back around Thanksgiving I helped our church identify and install a new video streaming setup... and became the de-facto operator of the
    system. Part of this also apparently included taking over the sound system as well.

    It's actually quite a nice setup, the main board is a Mackie DL1608
    that we can control either by computer and there are a number of
    wireless and wired microphones. It's with the latter that I've found a problem.

    While remoted into the system I discovered that 4 of the longest
    wire-runs are somehow picking up a local radio station. I am able to
    mute them as they aren't currently used but need to figure out a way to get them back in service. The runs are roughly 90 - 100 feet each and I don't know what kind of wiring was used for them.

    Does anyone have any suggestions or ideas on filtering out the signal?

    Interesting!

    In HAM Radio, sometimes wires will pick up a hum, and a ferrite band
    will usually fix it. It's the same thing you use to 'filter' a phone line
    that is used for DSL modems, so you might have one around to try...

    I googled it - also called a Ferrite Choke - here's a link to what I'm referring to...

    https://www.amazon.com/VSKEY-Anti-Interference-Telephones-Equipment-Appliances/dp/B078XKHLKG/ref=asc_df_B078XKHLKG/?tag=hyprod-20&linkCode=df0&hvadid=312039478953&hvpos=&hvnetw=g&hvrand=4902472137321900813&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9013482&hvtargid=pla-567906389220&psc=1






    ... 10... 9... 8... 7... 6... (Bo Derek getting older).
    --- MultiMail/Mac v0.52
    ■ Synchronet ■ * Slate Hell BBS | msbgtn01.synchro.net | Mooresburg, TN
  • From Rampage@VERT/SESTAR to Hatton on Monday, March 01, 2021 03:30:38
    Re: Church Sound Board Picking up Radio
    By: Hatton to All on Sun Feb 28 2021 18:39:01


    Hatton> Does anyone have any suggestions or ideas on filtering out the signal?

    making sure the ground/shield on the cables is right is the first thought i have... if it isn't, all kinds of signals can bleed in...


    )\/(ark

    ---
    ■ Synchronet ■ The SouthEast Star Mail HUB - SESTAR
  • From Hatton@VERT/THRCORN to Rampage on Monday, March 01, 2021 15:28:13
    Hatton> Does anyone have any suggestions or ideas on filtering out the signal?

    Thanks for all the responses!

    DM / Rampage: I know the runs are XLR cables but am unsure beyond that; I'll have to do some more research. Definitely worth digging up a floor plate and pulling the plug off the board to check.

    Jimmy: I believe I have a pack of ferrites laying around, I'll see bring those when I take the screwdriver!

    Thanks again!

    Hatton

    ---
    ­ Synchronet ­ Three Corners and Beyond! http://3corners.us
  • From Lupine Furmen@VERT/FURFOL to Hatton on Monday, March 01, 2021 21:17:59
    Re: Church Sound Board Picking up Radio
    By: Hatton to Rampage on Mon Mar 01 2021 15:28:13

    I'm having a similar problem with the PC Speakers hooked to my BBS Server. It's a faint background sound (just enough to be annoying) And I have no control over the volume of it. I can turn the speaker volume up and down and the volume of the music never changes.
    -+-

    Lupine Furmen
    -Dallas Vinson
    Furmens Folly (FIDO 1:123/257) - telnet: furmenservices.net:23
    SSH: furmenservices.net:23222
    Before the Web - telnet: furmenservices.net:23232
    Legends of Yesteryear (FIDO 1:123/256) - telnet: furmenservices.net:23322
    Sound Source ]|[ - telnet: furmenservices.net:2323



    Dallas

    ... I'm going to make a prediction - it could go either way.

    ---
    ■ Synchronet ■ Furmen's Folly - furmenservices.net:23
  • From JIMMY ANDERSON@VERT/OTHETA to HATTON on Tuesday, March 02, 2021 10:55:00
    HATTON wrote to RAMPAGE <=-

    Hatton> Does anyone have any suggestions or ideas on filtering out the signal?

    Thanks for all the responses!

    DM / Rampage: I know the runs are XLR cables but am unsure beyond that; I'll have to do some more research. Definitely worth digging up a
    floor plate and pulling the plug off the board to check.

    Jimmy: I believe I have a pack of ferrites laying around, I'll see
    bring those when I take the screwdriver!

    Let us know how it goes! Now we're all invested. :-)




    ... To get back on your feet, just miss two car payments.
    --- MultiMail/Mac v0.52
    ■ wcQWK 8.0 ≈ Omicron Theta * Memphis, TN * winserver.org
  • From Hatton@VERT/THRCORN to ALL on Monday, May 10, 2021 02:06:24
    Re: Church Sound Board Pickin
    By: JIMMY ANDERSON to HATTON on Tue Mar 02 2021 10:55 am

    Hatton> Does anyone have any suggestions or ideas on filtering out
    the signal?

    DM / Rampage: I know the runs are XLR cables but am unsure beyond
    that; I'll have to do some more research. Definitely worth digging
    up a floor plate and pulling the plug off the board to check.

    Let us know how it goes! Now we're all invested. :-)

    Picking this thread back up as I was finally able to get into the building and do some testing.

    Note, this is just for the "worst offender" line. I believe I've isolated the issue to somewhere in the line between the microphone and the XLR jack. I finally got to where the jack is and unplugged the mic and there is no excess audio.

    Looking at the line, it's super thin and there's a section where the rubber/sheath is gone so the ground wire looks exposed. It was also coiled up and zip-tied. Spreading the cable out made no change so now I'm going to need to go back and test with the ferite.

    At least I don't have to go chase the wire from the box to the board... at least I hope I don't.

    Hatton

    ... Advertising is the rattling of a stick inside a swill bucket.

    ---
    ■ Synchronet ■ Three Corners and Beyond! http://3corners.us
  • From The Millionaire@VERT/TRMB to Hatton on Friday, July 09, 2021 07:19:00
    Back around Thanksgiving I helped our church identify and install a new video streaming setup... and became the de-facto operator of the system. Part of this also apparently included taking over the sound system as well.

    It's actually quite a nice setup, the main board is a Mackie DL1608 that we can control either by computer and there are a number of wireless and wired microphones. It's with the latter that I've found a problem.

    While remoted into the system I discovered that 4 of the longest wire-runs are somehow picking up a local radio station. I am able to mute them as they aren't currently used but need to figure out a way to get them back in service. The runs are roughly 90 - 100 feet each and I don't know what kind of wiring was used for them.

    Does anyone have any suggestions or ideas on filtering out the signal?

    Thanks!
    Hatton

    ---
    ¨ Synchronet ¨ Three Corners and Beyond! http://3corners.us


    I remember using my sister's record player in the basement of our house in
    the olden days and got radio playing through it. Radio frequencies always interfering with something else.

    $ The Millionaire $
    (Co-SysOp Of The Rusty Mailbox)

    ---
    þ Synchronet þ The Rusty MailBox - Penticton, BC Canada